GPS Australia - Bricked Nav-Track (Tevion) Route 66 PWM3501

chrisngo

27th October 2009, 06:06 PM

johnhajter

29th October 2009, 07:28 AM

Hey guys,

I have a PWM3501C Navtrack with Tevion and Route 66 Software for testing.

the GPS errored on first and second time i started the GPS software.
I gave it a reset, from the back with a pin.
Now it has bricked itself, and just pauses on the Nav-Track welcome logo/screen.

Is there any way to reflash or fix it?? i have tried it on a computer and it states 'unrecognisable device'

Any ideas?

I Also have the same model with WindowsCE and Sensis maps loaded, Another tester, but errors when i start activesync..
hmmm
I have tried an SD card, which seemed to work - but as it was full of 8mp images, i couldn't unload any of them as it errored because it ran out of memory / buffer.

Hi chrisngo
I've read somewhere that when you hold the menu button and reset the device you get the bootloader and then you can select the usb, check this one: http://navigo.wikispaces.com/
they may be similar and look at this,it may be useful: http://navigo.wikispaces.com/WinCE+without+regedit
they came up with this:
"Using a card reader or similar, open the root of the SD card on
your PC and create a new text file and call it "shell.ini" (without quotes). Open the file and add the following text (without quotes) "\windows\explorer.exe"

When you reboot the device and select the Navigation Icon, you will
boot into WinCE where you can access files/programmes stored on
the SD card and internal memory via WinCE's explorer program.

This method works on my SY885 which is running WinCE 5.0"

hope this helps.