![]() |
|
||||||||||
|
|
|||||||||||
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#1
|
||||
|
||||
|
Deleting addresses from on road nav
After selecting the address you require, it enters History and becomes a large file of unwanted addresses. I have searched the entire folders on the PC without success where these are stored. Can someone explain how to clear these entries .Les
|
|
#2
|
||||
|
||||
|
G'day mate. The history data is stored in a file named "historics.gwpt".
If you connect your TwoNav Adventura to Your PC via the USB cable, you will see it as a drive in the File explorer on the PC. On my machine a Local Drive and a Removable disk appear. The removable disk is the SD card in the Adventura and the Local Disk is the internal memory of the Adventura. If you search the Local disk you will find a directory named "TwoNav", inside this directory you will find the file "historics.gwpt". It is possible to view this file using a text editor and if you edit the line or lines you are concerned about, then your file will be shorter and so will the list that shows under history in the Adventura. Hope this helps you. |
|
#3
|
||||
|
||||
|
Deleting addresses from on road nav
Thank you very much graywun, it works well using Notepad. Les
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|